U Want Local USA

Give Us A Call Today!
866-844-4661

Upfront Free Estimate!

Available upon request!

Lift Chairs Florence AL

Lift Chairs Florence AL

How Stair Lifts Work

A stair lift is basically a chair that travels along and rail or track that is mounted to a stairway.

There is a motor within the base of the chair that is generally powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are utilized to move the stair lift chair without anyone being on it. This is particularly helpful if two people utilize the lift and the lift is at the opposite end of the track when a user wants to use it. the user simply calls the lift to come to them using a call/send switch. Another use of call/send switch is to send out the lift away after use. Some people do not like the appearance of the lift parked in the main living area of the house and will send it to the opposite end when not in use. They merely call it back when required.

Stair Lift Components

Although the design and style of stair lifts will vary between makers they all have some fundamental parts typical to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (normally a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts offer the option of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the stairs to safely access or dismount the stair lift in a place where, if they fall, they will not fall on the stairs.

Power supply – While most stair lifts are battery ran today all model will require a power supply to either charge the battery or power the unit straight in the case of non-battery powered units. Non-battery powered stair lifts draw a lot of power and normally require a devoted circuit.

Call/Send Controls – Call/Send controls are typically installed on the wall near each end of the stair lift track to offer a way for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is simply a seat for the user to sit on while using the lift. Depending on the model it may swivel at the top and/or bottom of the track and will generally fold out of the way when not in use.

Seat Belt – As in a car the stair lift safety belt is planned to hold the user safely seated on the seat while the lift is in usage.

Foot Rest – The foot remainder of the stair lift is a security function to prevent the the users feet from hitting the steps while using the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches constructed into them to stop the lift needs to it hit anything on the stairway and will flip up out of the way when the lift is not in use.

Motor – The motor that drives a  lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor rotates at too high a speed to securely move the stair lift the track at type of transmission is used to decrease the speed while increasing the power offered.

Battery Battery charger – Battery powered stair lifts should have a battery charger of some sort to keep the battery charged. The chargers are typically found under the track or near one end of the track. The battery charger works automatically with no action needed by the user.

Battery – The batteries utilized in stair lifts are relatively expensive and found within the base of the seat near the motor. They will need to be replaced at some time but their life expectancy is measured in years and thier replacement ought to not be a huge issue.

The best ways to Measure for Your Stair Lift Setup In Florence

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape needs to not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Determine the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearby door, wall or other obstruction at the top of the stairs.

chair lift Florence

The Benefits of Stair Lifts for Senior Citizens In Florence Alabama

Outside stair lift Limited mobility is a problem for many seniors and a concern for their families in Florence. Seniors who wish to stay in their houses and remain independent can enhance their mobility and remain safe by setting up a stair lift.

A stair lift can transfer you or a loved one safely from one floor to another in your home. A stair lift can supply a safe means of transportation so that you will not need to fret about the dangers of falling on the stairs. It is a particularly great alternative for an elderly person who lives alone.

3 Essential Utilizes for Heavy-Duty Stair Lifts In Florence

Stair lifts been available in a variety of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting up to 350 pounds at the same time, and at the other end, sturdy stair lifts use a broader seat and can handle a greater series of body types.

1. You Can Offer Access to Nearly Everyone

Because of the larger, more powerful design, the stair lift offers ease of access and enhances mobility for anybody who’s much heavier than average. However, the common stair lift might be too narrow or too short for some, and as the sturdy design uses a larger, higher seat, it even more accommodates anybody who’s taller than average or has difficulty conveniently using a basic design.

2. Industrial Applications

While not needed to meet ADA requirements, stair lifts supply an added benefit to those with mobility problems.

Within Florence a home, a basic lift might accommodate 2 average-sized adults, however what about when you have to handle the general public? Your client base, customers, and patients most likely been available in a range of shapes and sizes, so the heavy-duty model essentially suits everybody who would have to use the stairs.

Be aware that, to install a durable lift, any staircase needs to offer 36 inches of space.

3. For Numerous Household Members

Exactly what takes place, though, when several member of the family need accessibility? Whether you’re satisfying a current requirement or expecting a future one, setting up a larger lift takes everyone’s physical needs into consideration. If your house’s geared up with enough space, take precautions by having a heavy-duty lift set up.

Call Us Now 866-844-4661 For A No Obligation Quote