U Want Local USA

Give Us A Call Today!
866-844-4661

Upfront Free Estimate!

Available upon request!

Archive for the ‘Chair Lifts DC ’ Category

Chair Lifts Washington DC

Chair Lifts Washington DC

How Chair Lifts Work

A chair lift is essentially a chair that travels along and rail or track that is installed to a stairway.

There is a motor within the base of the chair that is usually powered by a battery also within the base of the chair. The stair lift motor turns a gear that is meshed into a geared strip on the track or rail. When the gear turns the chair is moved along the geared strip. When the motor turns the gear the chair moves one direction, when the motor’s direction is reversed the chair moves the opposite way.

Call/Send switches are used to move the stair lift chair without anybody being on it. This is particularly practical if 2 people use the lift and the lift is at the opposite end of the track when a user wishes to use it. the user just calls the lift to come to them utilizing a call/send switch. Another use of call/send switch is to send out the lift away after use. Some people do not like the appearance of the lift parked in the main living area of the home and will send it to the opposite end when not in use. They just call it back when required.

Chair Lifts Components

Although the design and style of chair lifts will vary between manufacturers they all have some basic elements typical to them all:

Track or Rail – The stair lift track supports the chair, provides a mechanism (normally a geared strip) to move the chair and guides it up and down the stairway just as a train track guides a train.

Track Overruns – Some stair lifts use the alternative of an overrun at either the top of the track, bottom of the track or both. The function of a stair lift track overrun is to move the user far from the staircase to safely access or dismount the stair lift in an area where, if they fall, they will not fall on the stairs.

Power supply – While a lot of stair lifts are battery ran today all model will require a power supply to either charge the battery or power the system directly in the case of non-battery powered units. Non-battery powered stair lifts draw a great deal of power and normally need a devoted circuit.

Call/Send Controls – Call/Send controls are normally mounted on the wall near each end of the stair lift track to offer a method for a user to call the chair to them or send it away when not needed. They can be either cordless or wired to the lift depending upon the design.

Seat – The stair lift seat is merely a seat for the user to sit on while using the lift. Depending on the model it may rotate at the top and/or bottom of the track and will typically fold out of the way when not in use.

Seat Belt – As in a car the stair lift seat belt is planned to hold the user securely seated on the seat while the lift remains in use.

Foot Rest – The foot remainder of the stair lift is a safety function to prevent the the users feet from hitting the steps while utilizing the lift and a comfort function to support the user’s feet when resting on the seat. The foot rest will have switches developed into them to stop the lift needs to it strike anything on the stairway and will turn up out of the way when the lift is not in use.

Motor – The motor that drives a lift chair along the track is found in the base of the seat.

Transmission – Due to the fact that the motor turns at expensive a speed to safely move the stair lift the track at kind of transmission is utilized to decrease the speed while increasing the power readily available.

Battery Battery charger – Battery powered stair lifts should have a charger of some sort to keep the battery charged. The battery chargers are usually found under the track or near one end of the track. The charger works immediately without any action needed by the user.

Battery – The batteries used in stair lifts are fairly pricey and found within the base of the seat near the motor. They will have to be changed at some time however their life expectancy is determined in years and thier replacement should not be a big issue.

How To Measure for Your Chair Lift Installation In Washington

Measurement 1: Stand at the top of stairs and extend the measuring tape down to the landing, letting it rest on edge of each tread. The tape should not sag or flex along the way. Record the distance from the edge of the upper landing to where the end of the measuring tape rests on the landing at the bottom of the stairs.

Measurement 2: Measure from the edge of the upper landing (like Measurement 1) to the edge of the very first stair’s tread at the bottom.

Measurement 3: Measure the width of your stair’s treads.

Measurement: Measure from the edge of the very first stair at the bottom to the wall (or door), if there is one.

Measurement 5 through 7 Measurements 5-7: These are the tread measurements.

Measurement 8: Measure from the top step to the nearest door, wall or other obstruction at the top of the stairs.

chair lift Washington

The Benefits of Chair Lifts for Senior Citizens In Washington District of Columbia

Outdoor stair lift Limited movement is a concern for many senior citizens and a concern for their families in Washington. Seniors who want to stay in their homes and stay independent can improve their mobility and stay safe by installing a stair lift.

A stair lift can transfer you or a loved one securely from one floor to another at home. A stair lift can offer a safe means of transportation so that you will not have to fret about the threats of falling on the stairs. It is an especially good choice for a senior who lives alone.

3 Important Utilizes for Heavy-Duty Stair Lifts In Washington

Stair lifts can be found in a range of sizes and capacities. Compact models accommodate and provide mobility for narrow staircases, supporting as much as 350 pounds at the same time, and at the other end, durable stair lifts provide a larger seat and can manage a greater series of body types.

1. You Can Supply Access to Nearly Everybody

Because of the bigger, more powerful design, the stair lift supplies ease of access and enhances movement for anybody who’s heavier than average. However, the normal stair lift might be too narrow or too short for some, and as the durable design uses a bigger, greater seat, it further accommodates anybody who’s taller than average or has difficulty conveniently using a standard design.

2. Industrial Applications

While not had to meet ADA standards, stair lifts offer an added benefit to those with movement problems.

Within Washington a home, a standard lift might accommodate two average-sized adults, however exactly what about when you need to deal with the public? Your client base, clients, and patients most likely can be found in a series of shapes and sizes, so the durable model basically fits everybody who would need to utilize the stairs.

Understand that, to install a heavy-duty lift, any staircase must supply 36 inches of room.

3. For Numerous Family Members

Exactly what occurs, however, when several member of the family require ease of access? Whether you’re meeting an existing requirement or expecting a future one, setting up a bigger lift takes everybody’s physical requirements into consideration. If your house’s equipped with sufficient area, take safety measures by having a sturdy lift set up.

Call Us Now 866-844-4661 For A No Obligation Quote